Various Shaft Surface Hardening Equipment

Product Detail

"Axis surface quenching equipment" can be customized professional equipment, heat treatment of various shaft surface heat quenching, generally quench hard layer between 0.8-1.5mm, or have user requirements, 1-8mm, available intermediate frequency series, we two The series of products (high-frequency, medium-frequency series) can meet the needs of different hardened hard layers, a variety of equipment types, power is also different from 30KW-500KW.




Which shafts can be applied to "various shaft surface hardening equipments"? Strictly speaking, various shafts are possible. For example, transmission shafts, transfer shafts, camshafts, automotive semi-axes, long shafts, elongate shafts, optical shafts, accessories shafts, motor shafts, etc. The product is subjected to surface heat quenching heat treatment.




"Whether the surface quenching equipment for various shafts" is chosen "Leung Cheng"?
1. Our company is a production-oriented enterprise, can be directly supplied, eliminating the middlemen, directly benefiting customers;
2. Our equipment can be professionally customized, professionally customize the frequency band suitable for your workpiece;
3. I The company's products only use electricity, is a new type of non-polluting new products, and energy saving, is a good helper for entrepreneurship.




"Axial Surface Quenching Equipment" Features:
1. Direct heating, small heat loss, so fast heating, high thermal efficiency.
2. During the heating process, due to the short heating time, the surface of the part is less oxidized and decarburized. Compared with other heat treatments, the scrap rate of the parts is extremely low.
3. After quenching, the hardness of the surface of the parts is high, the core maintains good plasticity and toughness, and it exhibits low notch sensitivity, so the impact toughness, fatigue strength and wear resistance are greatly improved.
4. Quenching equipment is compact, small footprint, easy to use (ie, easy to operate).
5. The production process is clean, no high temperature, and good working conditions.
6. Can perform selective heating.
7. The quenched mechanical parts have small brittleness, and can also improve the mechanical properties of the parts (such as yield point, tensile strength and fatigue strength). The quenched hardness of steel parts that are also quenched by induction heating is also higher than that of ordinary furnaces. hardness.




Main Technical Parameters and Characteristics of "Axial Surface Quenching Equipment" (take 80kw as an example):
Operating Power Single-phase 380V/50Hz Cooling Water Flow (Main Unit) 32L/Min (0.1MPa)
Operating voltage range 360V/420V Cooling water flow (transformer) 29 L/Min (0.1MPa)
Maximum input current 120A Cooling pressure 0.1~0.3Mpa
Maximum output power 80KW Host weight 70Kg
Oscillation frequency 15~35KHz Transformer weight 90kg
Efficiency 90% Host Dimensions (mm3) 600×480×1360
Continuity of load 100% Transformer dimensions (mm3) 500×800×580
Equipment packaging: wooden packaging
In fact, the actual size shall prevail!




"Quenching of shaft surface quenching equipment" quenching process: Ultrasonic quenching equipment The CNC quenching machine is equipped with a ring inductor and the splined shaft is clamped on the quenching machine. As long as the jog switch is activated, the spline shaft automatically rises into the ring inductor, Automatic rotary heating, water spray quenching, automatic drop to the original position. The edge of the water quenching, using this quenching process, you can guarantee the depth of hardened layer and quenching hardness.
The above is the introduction of the product. If you want to know more product information, please contact us in time. Please look for "China's Leader" to make your life better! +8613014650631 General Li.